Magazine:

Routing and distributive equipment of Netrwork Electronics Company

Review contents:

Company Network Electronics ASA (Norway) is known as the manufacturer of the reliable professional studio and telecommunication equipment. Its production is world-wide distributed, that is first of all caused by advanced technical decisions applied in produced devices and optimum price/quality ratio of the equipment. Wide application of production of this company in Russia is promoted that its routing and distribution and optical equipment is certificated in the Russian Federation according with system “Communication” and corresponds to GOST P ISO 9001—96 “Technical requirements to the equipment of distributive networks of cable TV”, approved by Ministry of Communications of Russia, and RD 45.059—99 “Technical requirements. Equipment and systems of transmission of synchronous digital hierarchy”. Production of Network Electronics is certificated under standard ISO 9000/AQAP 120. For convenience of the Russian consumers of Network Electronics products in Moscow the certificated service-center which carrying out the technical support and service is functioned. All equipment of the company is provided by 3 years guarantee.

Production of Network Electronics Company considering within the margins of this article, is presented by the line of ConQuer equipment — distribution amplifiers.

Distribution amplifiers of Network Electronics Company for analog and digital video/audio signals are produced in two performance versions: as separate units for installation in 19" rack (ConQuer Compact Frame series) or as modules for installation in chassis FR-2RU-10—2 together with other modules of ConQuer or Flashlink series.

In independent performance the following models are presented:

  • AV0110 — the distribution amplifier 1×10 for analog video (bandwidth 80 MHz) and audio signals (20 Hz…100 MHz), the cabinet 1 RU (483×44 × 40 mm);
  • A0108ds — two distribution amplifiers 1×8 for analog audio stereosignals, the cabinet 1 RU (483×44 × 45 mm);
  • V0106q — four distribution amplifiers 1×6 for analog video signals (bandwidth of 500 MHz), the cabinet 1 RU (483×44 × 40 mm);
  • SDI0106Q — quadruple distribution amplifier 1×6 for digital video signals (143…360 Mbit/s), the cabinet 1 RU (depth 40 mm);
  • AD0108Q — quadruple distribution amplifier 1×8 for digital audio signals AES/EBU (inputs AES3, AES-3id, S/PDIF), the cabinet 1 RU (depth 45 mm).

For installation in the chassis the following modules of distribution amplifiers of ConQuer Modular series are produced.

8×8 router with cable corrector for TV routing signals
ConQuer AV0110 distribution amplifier 1×10 for analog video and audio signals
Distribution amplifiers of ConQuer series
ModelDescription
DA-AAThe distribution amplifier 1×8 for analog audio signals
DA-AESThe distribution amplifier 1×8 for digital audio signals AES
DA-VAThe distribution amplifier 1×6 for analog video signals; can apply for distribution of SDI, corresponds to specification SMPTE-259M
DA-SDI-NRCDistribution amplifier SDI 1×6, full compatibility with DVB-ASI, all outputs support 75 Ohm AES-3id. Cable equalizer on input, output without regeneration of signal
DA-SDIDistribution amplifier SDI 1×6, full compatibility with DVB-ASI, all outputs support 75 Ohm AES-3id. Cable equalizer on n input, output with regeneration of signal
DA-HDSDIBroadband distribution amplifier HD-SDI 1×6, the stream speed range 19.4…1485 Mbit/s. Supports 75 Ohm AES-3id
DA-140The distribution amplifier 1×6 for telecommunication signals with cable equalizer, 140…155 Mbit/s, G703

The material is provided by I.S.P.A. — Engineering Company

For advertising please contact: reclama at 625-net.ru.

All the questions and offers please mail to: magazine at 625-net.ru.

Editorial board: magazine at 625-net.ru, ph./fax: +7 691 7724, 695 9588.

Electronic Mass Media registration certificate El # 77-2794.

© 2003—2009 Publishers 625. All rights reserved.